Concrete Repair & Restoration

When to Repair vs. Replace

Not every cracked or damaged concrete surface needs full replacement. In many cases, we can repair and restore your existing concrete for a fraction of the cost. The key is acting early before minor damage becomes a major problem.

At RealDeal Blue Springs Concrete, we provide honest assessments of your concrete condition. We'll tell you if repair makes sense, or if replacement is the better long-term investment. We've been working in Blue Springs since 2024, and we've seen every type of concrete damage. We know what can be fixed and what can't.

Common Concrete Repairs We Handle

Here are the most common concrete repair projects we see:

• •Crack repair: Small cracks can be filled and sealed to prevent water infiltration and further damage. We use flexible sealants that move with seasonal temperature changes.
• •Spalling and surface damage: When the concrete surface flakes or chips, we grind it down and apply a resurfacing compound for a smooth, renewed finish.
• •Leveling sunken slabs: Settled concrete can be lifted and leveled using mudjacking or polyurethane foam injection. This is often faster and cheaper than replacement.
• •Joint and edge repairs: Damaged expansion joints or broken edges can be repaired with epoxy or polymer-modified concrete.
• •Partial slab replacement: If only one section of your driveway or patio is damaged, we can remove and replace just that area, matching it to the existing concrete.
• •Decorative restoration: Faded or worn stamped and colored concrete can be cleaned, re-stained, and resealed to restore its original appearance.

When Replacement Makes More Sense

Sometimes repair isn't the answer. If your concrete has widespread cracking, severe settling, structural damage, or has reached the end of its lifespan, replacement is usually the smarter choice.

We'll walk you through the pros and cons of repair vs. replacement during your free consultation. We want you to make the best decision for your property and budget, not just the most expensive one.

Our Repair Process

Every repair project starts with an assessment. We inspect your concrete, identify the cause of the damage, and recommend the best fix. Common causes include improper installation, poor drainage, freeze-thaw damage, and normal wear over time.

Once we agree on a plan, we prepare the damaged area by cleaning and removing loose material. We apply the appropriate repair product, whether that's epoxy, patching compound, or new concrete. We finish and cure the repair to match your existing surface as closely as possible.

Most repairs are completed in 1-2 days, depending on size and complexity. You can usually walk on repaired areas within 24 hours, but we recommend waiting 3-7 days before heavy use.

How to Prevent Future Damage

The best repair is the one you don't have to do. Here's how to extend the life of your concrete:

Keep your concrete sealed. A quality sealer protects against moisture, stains, and surface wear. Reseal every 2-3 years for best results. Fix small cracks early before water gets in and causes bigger problems. Clean your concrete regularly to remove dirt, oil, and chemicals that can damage the surface. Avoid using de-icing salts in winter, as they can cause surface scaling and damage.

Make sure your concrete has proper drainage. Water pooling on or around concrete leads to settling, cracking, and erosion. If you notice drainage issues, we can help fix them before they cause expensive damage.

Trusted Local Concrete Repair

We're local, licensed, and experienced in all types of concrete repair. We use quality materials designed for Missouri weather, and we stand behind our work. Whether you need a small crack filled or a major restoration project, we provide the same level of care and professionalism.

We also handle new concrete installations if your project requires more than repair. Check out our services for sidewalks and walkways or other concrete work.

Frequently Asked Questions